AB7884-F

AB7884-F
Производитель: HMS Industrial Networks AB (Швеция)
Модель: 14819-17
Артикул: AB7884-F
Наличие: Предзаказ
Кол-во:     - или -   В закладки
В сравнение
Anybus X-gateway – Interbus CU Slave - Modbus RTU Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Interbus and Modbus RTU networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Коммуникационные интерфейсы
Интерфейсы Interbus Slave-Modbus-RTU Slave
Управляемый: via USB port withAnybus Configuration Manager software
Конструктив
Назначение Шлюз Interbus Slave
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium and plastic
Вид монтажа: Vertical / Flat*
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: -25 to +65 ℃ or -13 to +149°F
Вес, кг. 400g or 0,880 lbs
Габариты, мм 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Гарантия от производителя 3 years
Дополнительные аксессуары *Extra wide DIN-clip for flat mounting(Order Code SP1784)
Комплект поставки Resource CD, USB configuration cable, Quick start guide, manuals. Anybus Configuration Manager software. For bulk pack orders, all configuration software can be downloaded under "files anddocumentation" from this website. (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 400mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



Описание

Anybus X-gateway – Interbus CU Slave - Modbus RTU Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Interbus and Modbus RTU networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Характеристики

Коммуникационные интерфейсы
Интерфейсы Interbus Slave-Modbus-RTU Slave
Управляемый: via USB port withAnybus Configuration Manager software
Конструктив
Назначение Шлюз Interbus Slave
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium and plastic
Вид монтажа: Vertical / Flat*
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: -25 to +65 ℃ or -13 to +149°F
Вес, кг. 400g or 0,880 lbs
Габариты, мм 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Гарантия от производителя 3 years
Дополнительные аксессуары *Extra wide DIN-clip for flat mounting(Order Code SP1784)
Комплект поставки Resource CD, USB configuration cable, Quick start guide, manuals. Anybus Configuration Manager software. For bulk pack orders, all configuration software can be downloaded under "files anddocumentation" from this website. (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 400mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



HMS Industrial Networks в Украине © 2024
All Rights Reserved HOLIT Data Systems Ltd. - Design by HOLIT