AB7691-F

AB7691-F
Производитель: HMS Industrial Networks AB (Швеция)
Модель: 14724-17
Артикул: AB7691-F
Наличие: Предзаказ
Кол-во:     - или -   В закладки
В сравнение
Anybus X-gateway - CANopen Slave - EtherCAT Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and EtherCAT networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Коммуникационные интерфейсы
Интерфейсы CANopen Slave-EtherCAT Slave
Управляемый: via USB port withAnybus Configuration Manager software
Конструктив
Назначение Шлюз CANopen Master
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium and plastic
Вид монтажа: Vertical / Flat*
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: -25 to +65 ℃ or -13 to +149°F
Вес, кг. 400g or 0,880 lbs
Габариты, мм 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Гарантия от производителя 3 years
Дополнительные аксессуары *Extra wide DIN-clip for flat mounting(Order Code SP1784) Anybus IPconfig Tool -Utility for module TCP/IP configuration (Windows 32/64-bit) Downloadable under Files and Documentation
Комплект поставки Resource CD, USB configuration cable, Quick start guide, manuals. Anybus Configuration Manager software. For bulk pack orders,all configuration software can be downloaded under "files anddocumentation" from this website. (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 400mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



Описание

Anybus X-gateway - CANopen Slave - EtherCAT Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and EtherCAT networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Характеристики

Коммуникационные интерфейсы
Интерфейсы CANopen Slave-EtherCAT Slave
Управляемый: via USB port withAnybus Configuration Manager software
Конструктив
Назначение Шлюз CANopen Master
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium and plastic
Вид монтажа: Vertical / Flat*
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: -25 to +65 ℃ or -13 to +149°F
Вес, кг. 400g or 0,880 lbs
Габариты, мм 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Гарантия от производителя 3 years
Дополнительные аксессуары *Extra wide DIN-clip for flat mounting(Order Code SP1784) Anybus IPconfig Tool -Utility for module TCP/IP configuration (Windows 32/64-bit) Downloadable under Files and Documentation
Комплект поставки Resource CD, USB configuration cable, Quick start guide, manuals. Anybus Configuration Manager software. For bulk pack orders,all configuration software can be downloaded under "files anddocumentation" from this website. (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 400mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



HMS Industrial Networks в Украине © 2024
All Rights Reserved HOLIT Data Systems Ltd. - Design by HOLIT