AB7011-B-5PACK

AB7011-B-5PACK
Производитель: HMS Industrial Networks AB (Швеция)
Модель: 14581-17
Артикул: AB7011-B-5PACK
Наличие: Предзаказ
Кол-во:     - или -   В закладки
В сравнение
Anybus Communicator - FIPIO

Integrate your serial RS-232/422/485 based industrial devices and equipment to a FIPIO control system without the need for any changes to the device. Just connect, configure and you're done!

The Anybus® Communicator™ is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment to FIPIO. The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current FIPIO specifications guaranteeing network compatibility.

CONVERT ALMOST ANY TYPE OF SERIAL PROTOCOL

The Communicator is capable of converting almost any type of serial protocol such as Modbus RTU, ASCII, DF1 or any other type of proprietary Request/Response or Produce/Consume protocol.

Коммуникационные интерфейсы
Интерфейсы FIPIO
Протокол: ASCII/Vendor Specific Request/Response or Produce/Consume
Протокол: Rockwell DF1 DF1 Master
Протокол: Modbus RTU   Modbus RTU Master - Request/Response
Конструктив
Назначение Шлюз FIPIO
Серия Anybus Communicator
Степень защиты корпуса: IP20, NEMA rating 1
Max stations   31 nodes via RS-422 or RS-485
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: 0 to +55 ℃ or 0 to +131°F
Вес, кг. 150g or 0,33 lbs
Габариты, мм 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Гарантия от производителя 3 years
Дополнительные аксессуары USB-RS-232 configuration adapter (Order Code 019570)
Комплект поставки Resource CD, Configuration cable (RS-232) port, Installation sheet, D-sub connector with screw terminals for serial sub-network (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Примечание Anybus Communicators in 5-pack are shipped without CD, config cable and serial connector.
Питание
Входное напряжение питания DC: 24 VDC

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



Описание

Anybus Communicator - FIPIO

Integrate your serial RS-232/422/485 based industrial devices and equipment to a FIPIO control system without the need for any changes to the device. Just connect, configure and you're done!

The Anybus® Communicator™ is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment to FIPIO. The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current FIPIO specifications guaranteeing network compatibility.

CONVERT ALMOST ANY TYPE OF SERIAL PROTOCOL

The Communicator is capable of converting almost any type of serial protocol such as Modbus RTU, ASCII, DF1 or any other type of proprietary Request/Response or Produce/Consume protocol.

Характеристики

Коммуникационные интерфейсы
Интерфейсы FIPIO
Протокол: ASCII/Vendor Specific Request/Response or Produce/Consume
Протокол: Rockwell DF1 DF1 Master
Протокол: Modbus RTU   Modbus RTU Master - Request/Response
Конструктив
Назначение Шлюз FIPIO
Серия Anybus Communicator
Степень защиты корпуса: IP20, NEMA rating 1
Max stations   31 nodes via RS-422 or RS-485
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -40 to +85 ℃ or -40 to +185°F
Температура эксплуатации: 0 to +55 ℃ or 0 to +131°F
Вес, кг. 150g or 0,33 lbs
Габариты, мм 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Гарантия от производителя 3 years
Дополнительные аксессуары USB-RS-232 configuration adapter (Order Code 019570)
Комплект поставки Resource CD, Configuration cable (RS-232) port, Installation sheet, D-sub connector with screw terminals for serial sub-network (Power supply not included)
Сертификаты CE,CULUS, ATEX/Haz.Loc, RoHS
Примечание Anybus Communicators in 5-pack are shipped without CD, config cable and serial connector.
Питание
Входное напряжение питания DC: 24 VDC

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



HMS Industrial Networks в Украине © 2024
All Rights Reserved HOLIT Data Systems Ltd. - Design by HOLIT