Integrate your Modbus serial RS-232/422/485 based industrial devices and equipment to a LONWORKS control system without the need for any changes to the device. Just connect, configure and you're done!
The Anybus Communicator is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment on a Modbus RTU network to Lonworks.
The gateway makes it possible to convert Modbus registers data to LonWorks Variables (SNVT‟s and/or UNVT‟s). You can create a set of variables according to LonMark functional Profiles or you can create your own set of variables with User defined Network Variables (UNVT‟s).
The Communicator is slave a on the Modbus RTU side. This means that you connect this to a Modbus network which has a Modbus RTU Master connected. The configuration requires no programming and is made by an included configuration tool in Windows environment.
The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current Lonworks specifications guaranteeing network compatibility.
Коммуникационные интерфейсы | |
Интерфейсы | LonWorks в Modbus-RTU slave |
Протокол: Modbus RTU | Modbus RTU Slave |
Конструктив | |
Назначение | Шлюз LonWorks |
Серия | Anybus Communicator |
Степень защиты корпуса: | IP20, NEMA rating 1 |
Max stations | 31 nodes via RS-422 or RS-485 |
Возможности монтажа | DIN-rail (EN 50022 standard) |
Температура хранения | -40 to +85 ℃ or -40 to +185°F |
Температура эксплуатации: | 0 to +55 ℃ or 0 to +131°F |
Вес, кг. | 150g or 0,33 lbs |
Габариты, мм | 120 x 75 x 27mm or 4,72 x 2,95 x 1,06" |
Гарантия от производителя | 3 years |
Дополнительные аксессуары | USB-RS-232 configuration adapter (Order Code 019570) |
Комплект поставки | Configuration program LWTool,a DSUB connector with screw terminalsfor the serial sub-network. Installation Leaflet for the electrical installation |
Сертификаты | CE,CULUS, ATEX/Haz.Loc |
Примечание | Only Modbus Slave, Configuration Tool, LW Tool-ABC included. |
Питание | |
Входное напряжение питания DC: | 24 VDC |
Integrate your Modbus serial RS-232/422/485 based industrial devices and equipment to a LONWORKS control system without the need for any changes to the device. Just connect, configure and you're done!
The Anybus Communicator is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment on a Modbus RTU network to Lonworks.
The gateway makes it possible to convert Modbus registers data to LonWorks Variables (SNVT‟s and/or UNVT‟s). You can create a set of variables according to LonMark functional Profiles or you can create your own set of variables with User defined Network Variables (UNVT‟s).
The Communicator is slave a on the Modbus RTU side. This means that you connect this to a Modbus network which has a Modbus RTU Master connected. The configuration requires no programming and is made by an included configuration tool in Windows environment.
The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current Lonworks specifications guaranteeing network compatibility.
Коммуникационные интерфейсы | |
Интерфейсы | LonWorks в Modbus-RTU slave |
Протокол: Modbus RTU | Modbus RTU Slave |
Конструктив | |
Назначение | Шлюз LonWorks |
Серия | Anybus Communicator |
Степень защиты корпуса: | IP20, NEMA rating 1 |
Max stations | 31 nodes via RS-422 or RS-485 |
Возможности монтажа | DIN-rail (EN 50022 standard) |
Температура хранения | -40 to +85 ℃ or -40 to +185°F |
Температура эксплуатации: | 0 to +55 ℃ or 0 to +131°F |
Вес, кг. | 150g or 0,33 lbs |
Габариты, мм | 120 x 75 x 27mm or 4,72 x 2,95 x 1,06" |
Гарантия от производителя | 3 years |
Дополнительные аксессуары | USB-RS-232 configuration adapter (Order Code 019570) |
Комплект поставки | Configuration program LWTool,a DSUB connector with screw terminalsfor the serial sub-network. Installation Leaflet for the electrical installation |
Сертификаты | CE,CULUS, ATEX/Haz.Loc |
Примечание | Only Modbus Slave, Configuration Tool, LW Tool-ABC included. |
Питание | |
Входное напряжение питания DC: | 24 VDC |